The maximum load capacity of the Manipulator Arm is 100KG, with a working radius of 3 meters and a working height of 4 meters. Equipped with pneumatic hoist and stainless steel wire rope. It has been sent to the port of Ecuador.
The main unit and fixture of the assistive robotic arm are connected by a steel wire rope, known as the soft rope type. Its characteristic is that the arm of the soft cable Manipulator Arm can rotate continuously 360°around the main axis of the column, using compressed air as the power source, and has two completely independent balancing pneumatic circuits (empty load balancing).
Advantages
1. A steel wire rope connects the host and fixture, allowing for the movement of workpieces over obstacles.
2. Full suspension function, pneumatic control, lightweight operation, fast operating speed.
3. Used in conjunction with various non-standard fixtures to lift workpieces of various shapes.
4. The range of use of robotic arms is wider: under the same height limit, the lifting stroke is wider than that of rigid manipulator arm.
5. Multiple security measures: gas cut-off protection, misoperation alarm, and elimination of safety hazards during operation and use.
6. Effective working radius and height can be set according to the actual working conditions on site, making mechanical use more user-friendly.
Its advantage is that it has a great degree of freedom in movement. The load can move almost unobstructed within a certain space, with a wider coverage area, making it particularly suitable for material lifting and handling in open areas, such as material turnover in workshops, truck loading and unloading, etc. Its structure is relatively simple and its cost is usually more advantageous. But in terms of load capacity, operational stability, and micro positioning accuracy, it may not be as good as a rigid manipulator arm.
