Dec 25, 2023 Leave a message

What Are The Types Of Manipulator Arm

According to the different forms of movement of the robotic arm, the manipulator can be divided into four forms: Cartesian coordinates, cylindrical coordinates, polar coordinates and multi-joint

 

1. Cartesian coordinate manipulator: the arm moves in a straight line in the direction of the three coordinate axes of the Cartesian coordinate system, that is, the arm expands and contracts, lifts up and down, and moves left and right. This coordinate form occupies a large space but the working range is relatively small and the inertia is large, and it is suitable for the situation that the working position is arranged in a straight line.

 

2. Cylindrical coordinate manipulator: the arm expands and contracts back and forth, lifts up and down and swings in the horizontal plane. Compared with the Cartesian coordinate formula, it occupies a smaller space and has a larger working range, but due to the relationship of the mechanism structure, the lowest position in the height direction is limited, so it cannot grasp the object on the ground, and the inertia is relatively large. This is a form of coordinates that is widely used in manipulators.

 

14

 

3. Polar coordinate manipulator: the arm is retracted back and forth, pitched up and down and swinging left and right. Its biggest feature is that it can obtain a large working range with a simple mechanism, and can grasp objects on the ground. Its motion inertia is small, but the error of the arm swing angle will cause amplification through the arm.

 

4. Multi-joint manipulator: its arm is divided into two sections, the big arm and the small arm, the big and small arms are connected by the elbow joint, and the big arm and the column are connected into the shoulder joint, plus the wrist joint between the wrist and the small arm, the multi-joint manipulator can complete the action almost like a human hand. The multi-joint manipulator has flexible action and small movement inertia, which can grasp the workpiece close to the machine base and work around obstacles. The multi-joint manipulator has wide adaptability, and after the introduction of computer control, its action control can be completed by the program and can be simulated by memory, which is the development direction of the manipulator.

 

Send Inquiry

whatsapp

Phone

E-mail

Inquiry