2-6 level Guide Rail Lifting Platform - exclusive vertical transportation machine for multi story factories/warehouses! The structure is stable and has strong hierarchical adaptability. The disassembly of the core structure and scene adaptation are explained as follows.
Core structure Analysis
1. Guidance support system: Double sided high-strength cold-rolled steel guide rails, fitted and installed, with a gap of ≤ 5mm. Each layer is equipped with positioning buckles and anti tilt sliders, suitable for lifting and lowering from 3-18 meters (2-6 layers), and runs stably without deviation.
2. Lift drive system: Hydraulic/chain dual drive is optional (hydraulic for 2-4 layers of light load, chain for 5-6 layers of heavy load), synchronous motor ensures horizontal lifting, precise limit for each layer, and stopping error ≤ 3mm.
3. Bearing platform structure: Made of anti slip patterned steel plate, equipped with 1.2m protective fence, 2-3 layers of conventional size 2.0*1.5m, 4-6 layers can be expanded to 3.0*2.0m, and the bottom is equipped with buffer device for cargo protection equipment.
4. Safety protection system: Each floor is equipped with a pager and linked safety door, and the platform is equipped with triple protection of overload alarm, emergency stop, and fall prevention; 6-layer model configuration with wind speed sensor (outdoor adaptation), ensuring comprehensive safety.
5. Control system: Supports layered independent+centralized control, can monitor the operating status in real time, equipped with manual emergency devices, can manually lower the platform when power is cut off, to avoid cargo detention.
2-6 Layers Adaptation Instructions
✅ 2-story (3-6 meters): Suitable for small shops and double decker workshops, with a load capacity of 2-3 tons, installation does not require complex infrastructure, suitable for vertical transportation of lightweight goods, and the first choice for cost-effectiveness.
✅ 3-4 floors (6-12 meters): Suitable for medium-sized factories and warehouses, with a load capacity of 3-5 tons, it can achieve cross layer supply of production line materials, turnover of goods up and down stairs, and adapt to high-frequency daily operations.
✅ 5-6 floors (12-18 meters): Suitable for large industrial plants and multi-level warehouses, with a load capacity of 5-10 tons, supporting cross layer transportation of heavy equipment and large quantities of materials, requiring reinforced guide rails and drive systems for stable loading.
Tip: For this Guide Rail Lifting Platform, EMET can customize structural solutions based on customers' floor height, site size, and load capacity requirements. Installation can be done both indoors and outdoors, with one-stop after-sales service.
