High altitude work can be seen everywhere in our daily lives, such as roof maintenance, air conditioning installation, exterior wall painting, solar equipment cleaning, and so on. There are clear regulations in China regarding high-altitude operations: any high-altitude operation where there is a possibility of falling more than 2 meters (including 2 meters) above the reference plane of the falling height is considered as high-altitude operation. In theory, working at heights carries certain risks, and workers should wear protective devices such as fall arresters, safety belts, safety ropes, and helmets.

When working in a vertical shaft, the depth of the well is small, and the workers need equipment to assist them in going down the well. The staff supported and fixed the rescue tripod at the wellhead, and the workers wore safety belts and personal protective equipment such as hand cranked anti fall devices, safety helmets, and safety ropes. They slowly lowered workers into the well using a hand cranked winch, and the safety rope of the Fall Arrester with a rescue winch freely extended and contracted as the workers descended. Under the action of the mechanism inside the device, it was in a semi tense state, and the descending workers had no sense of attachment. During the descent or operation process, if the wire rope of the hand winch breaks and the descent speed of the workers is too fast, the speed of pulling out the safety rope will increase, and the internal locking system will immediately lock automatically to prevent workers from continuing to fall and protect their life safety.

When the fall arrester with a rescue winch is in a stationary state, the winch handle can be lowered or retracted; Ordinary fall arresters follow high-altitude workers for mobile operations. Both hand cranked and ordinary fall arresters should be operated in accordance with the required specifications during use. The anti fall devices must be hung high and used low. When using, it should be hung on a sturdy and blunt structure above the user. The hanging point of the structure must be able to withstand a weight greater than the total weight of the staff and the anti fall device. The staff should not move too fast during the homework process; When tilting the homework, the angle should not exceed 30 degrees to prevent collision with other objects around.




